Reliable Heating & Furnace Repair Services in Winnipeg, MB
Furnace Repair In Winnipeg, Steinbach & Morris
Brown’s Plumbing and Heating has been repairing furnaces, boilers, and heating systems across Winnipeg, Steinbach, and Morris since 1974. Our licensed gas fitters and HVAC technicians carry fully stocked service vans for fast, transparent repairs, and when you call, a real person answers.
Call 204-818-8330
Why Furnace Repair Cannot Wait in Manitoba
Winnipeg’s average January low sits at approximately minus 16 degrees Celsius, and overnight temperatures regularly fall past minus 30. A furnace failure at these temperatures puts your pipes, your pets, and your family at serious risk within just a few hours. Even a furnace that is cycling too frequently or struggling to reach set temperature should be inspected immediately rather than monitored. Carbon monoxide from a cracked heat exchanger is an additional silent hazard that kills without warning.
If your furnace is making banging, clicking, or rattling noises, cycling on and off more than three times an hour, producing less heat than normal, or simply not turning on, do not wait. Call Brown’s at 204-818-8330 for a same-day assessment. We serve Winnipeg, Steinbach, and Morris.
Should You Repair or Replace?
Multiply the estimated repair cost by your furnace’s age in years. If the result exceeds 5,000, replacement is typically the smarter investment. A 20-year-old furnace facing a $300 repair scores 6,000 on this scale, which means it is time to have a replacement conversation. Brown’s will provide a no-obligation new furnace quote alongside any repair estimate so you can compare both options with real numbers in front of you.
Visit the Brown’s Heating Installation page to explore new furnace options and current financing offers, or ask your technician during the service visit.
Join Our MVP Program
Join the Brown’s MVP Membership and receive three 14-point precision tune-ups per year, priority emergency booking, and discounts on parts and labour. For Manitoba homeowners who cannot afford to have their heating system go down in January, MVP Membership is the most cost-effective protection available.
Brown’s Heating Repair Process from Start to Finish
- 01
Your call to us or a booking through the website. Same-day and next-day appointments across Winnipeg, Steinbach, and Morris.
- 02
Arrival of a licensed technician in a marked vehicle with a fully stocked parts van. You’ll know who is coming before they arrive.
- 03
A full diagnostic covering the heat exchanger, burners, blower motor, thermostat, safety switches, and gas valve. We do not guess.
- 04
A transparent written quote presented before any work begins. No surprise charges at the end of the job.
- 05
The repair itself, using manufacturer-approved parts. Most repairs carry a one-year parts and labour warranty.
- 06
A post-repair system test and homeowner walkthrough. We show you exactly what was done and what to watch for.
The 8 Most Common Furnace Problems Brown’s Diagnoses
Dirty or clogged air filter
The number one cause of restricted airflow and short-cycling in Manitoba homes. Disposable filters should be checked monthly during heating season and replaced every 60 to 90 days.
Faulty igniter or pilot light
The furnace runs through its startup sequence but produces no heat. In most cases this is a same-day fix with a stocked part.
Failed blower motor
You hear the furnace fire, but no air comes through the vents. The blower motor drives all the heat from the heat exchanger into your duct system.
Cracked heat exchanger
A serious safety issue that allows combustion gases, including carbon monoxide, to mix with circulated air. Any furnace with a confirmed crack should be shut off until repaired or replaced.
Bad thermostat or wiring
Blank display, temperature swings not matching set point, or a failure to call for heat. Often misdiagnosed as a furnace problem when the thermostat is the actual culprit.
Clogged condensate drain
Common in high-efficiency furnaces rated 96 percent AFUE and above. Condensate backs up and triggers a safety shutdown — looks like total failure but is often a straightforward fix.
Failed gas valve
The furnace ignites but shuts down before reaching the set temperature. The gas valve controls fuel delivery to the burners.
Dirty flame sensor
The furnace lights briefly then shuts off within seconds. The flame sensor rod is coated with a thin film of oxidation that prevents it from confirming a flame is present.
Why Winnipeg Homeowners Choose Brown’s for Furnace Repair
Serving Winnipeg, Steinbach, and Morris since 1974 — over 50 years of Manitoba heating experience
Licensed gas fitters and certified HVAC technicians on every service call
Fully stocked service vans with parts for all major brands, meaning most repairs happen on the first visit
Transparent pricing presented in writing before any work begins, with no hidden fees
MVP Membership available for priority service, annual tune-ups, and up to 30 percent off repairs
Furnace Repair Cost Ranges for Winnipeg
All pricing below is approximate. An exact written quote is always provided before work begins. Financing is available through Financeit and Enercare for larger repairs.
Igniter replacementParts and labour
$400–$1,100Blower motor replacement
$1,100–$4,600Heat exchanger repairReplacement often makes more sense if 15+ years old
Quoted on-siteThermostat replacement$600–$2,500 for smart/premium models
$225–$475Flame sensor cleaning or replacement
Quoted on-siteCondensate drain clearingMost jobs completed same-visit
Quoted on-site14-Point Precision Tune-Up & Safety Inspection
Seasonal special — regular pricing $175–$299 depending on equipment
$149
Frequently Asked Questions
Why is my furnace blowing cold air?
This can happen if your furnace’s pilot light is out, filters are clogged, or the thermostat is set incorrectly. A technician from Brown’s Plumbing & Heating can diagnose and repair the issue quickly to restore heat.
How fast can you respond to a heating emergency in Winnipeg?
We offer prompt emergency furnace repair across Winnipeg, Steinbach, and Morris, MB, often arriving the same day—especially during extreme cold.
How do I know if my furnace needs repair or full replacement?
Use the Rule of 5,000: multiply repair cost by furnace age. If the result is over 5,000, replacement is usually the better investment. Brown’s provides both a repair quote and a replacement quote side by side so you can make an informed decision based on actual numbers.
How quickly can Brown's respond to a furnace breakdown in Winnipeg?
Brown’s offers same-day and next-day furnace repair appointments across Winnipeg, Steinbach, and Morris. Emergency calls are handled as a priority. Call 204-818-8330 and a real person answers.
Does Brown's charge extra for weekend or holiday furnace repair?
Contact Brown’s directly at 204-818-8330 to confirm current after-hours rates. All pricing is disclosed before work begins.
Can you repair all furnace brands?
Yes. Brown’s Plumbing & Heating technicians are trained to repair and service all major furnace makes and models.
How much does a typical furnace repair cost?
Costs depend on the part and labor. Common repairs like igniters and thermostats typically run $400 to $1,100, while larger jobs such as a blower motor replacement can run higher. You’ll get upfront pricing before any work begins.